Panasonic PT-EX16KE Operating Instructions Manual

Contents

ConnectionsENGLISH - 27 Getting StartedConnecting example: AV equipmentVideo, S-video, DVDplayer, and HDMI videooutput devicesTo HDMI outputTo AV HDCPDVI video outputTo terminalTo terminalTo

To terminalTo terminalTo compositevideo outputTo componentvideo outputTo S-video outputDVI-D cableHDMI cableBNC cableBNC cableS-video cableAttentionz Always use one of the following when connecting a VCR.–■A VCR with built-in time base corrector (TBC)–■A time base corrector (TBC) between the projector and the VCRz If burst signals are connected to nonstandard signals, the image may be distorted. In such a case, connect atime base corrector (TBC) between the projector and the device.Notez Use an HDMI High Speed cable that adheres to the HDMI standard. Use of a cable that does not adhere to theHDMI standard, may result in abnormal operation such as cut-out of the image, failure to project, etc.z The terminal can be connected with an external device with a DVI terminal using an HDMI/DVIconversion cable. With some devices, however, the image may not appear. ( page 65)z The terminal can be connected to HDMI and DVI-D compatible devices, but normaloperation may not be possible with certain devices and the image may not appear.z The terminal (in the digital signal input mode) is compatible only with single link signals.