Panasonic PT-RW730 Operating Instructions Manual

Also see for PT-RW620: Operating instructions Operating instructions Operating instructions

Contents

ENGLISH - 11Read this first!CAUTION:r POWERWhen disconnecting the power cord, be sure to hold the power plug and power connector.If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric shockswill result.When not using the projector for an extended period of time, disconnect the power plug from the walloutlet.Failure to do so may result in fire or electric shock.Before replacing the projection lens, be sure to turn off the power and disconnect the power plug fromthe wall outlet.f Unexpected projection of light may cause injury to eyes.f Replacing the projection lens without removing the power plug may result in electric shock.Disconnect the power plug from the wall outlet before carrying out any cleaning.Failure to do so may result in electric shock.r ON USE/INSTALLATIONDo not place heavy objects on top of the projector.Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage orinjury. The projector will be damaged or deformed.Do not put your weight on this projector.You could fall or the projector could break, and injury will result.f Be especially careful not to let young children stand or sit on the projector.Do not place the projector in extremely hot locations.Doing so will cause the outer casing or internal components to deteriorate, or result in fire.f Take particular care in locations exposed to direct sunlight or near heaters.Do not place your hands in the openings beside the optical lens, while shifting the lens.Failure to observe this could cause injury.Do not install the projector in a location where salt pollution or corrosive gas may occur.Doing so may result in falling due to corrosion. Also, it may result in malfunctions.Do not stand in front of the lens while the projector is being used.Doing so can cause damage and burns to clothing.f Strong light is emitted from the projector’s lens.Do not place objects in front of the lens while the projector is being used.Doing so can cause fire, damage to an object, or malfunction of the projector.f Strong light is emitted from the projector’s lens.Always disconnect all cables before moving the projector.Moving the projector with cables still attached can damage the cables, which will cause fire or electric shocks tooccur.When mounting the projector on the ceiling, keep mounting screws and power cord from contact withmetal parts inside the ceiling.Contact with metal parts inside the ceiling can cause electric shocks.r ACCESSORIESWhen not using the projector for an extended period of time, remove the batteries from the remotecontrol.Failure to observe this will cause the batteries to leak, overheat, catch fire or explode, which may result in fire orcontamination of surrounding area.r MAINTENANCEAsk your dealer about cleaning inside the projector every 20 000 hours of usage as an estimatedduration.Continuous use while dust is accumulated inside the projector may result in fire.f For cleaning fee, ask your dealer.