Chapter 5 Operations — Web control function164 - ENGLISH[Network config] pageClick [Detailed set up] → [Network config].f Click [Network config] to display the [CAUTION!] screen.f Click the [Next] button to display the current settings.f Click the [Change] button to display the setting change screen.123456781 [PROJECTOR NAME]Enter the name of the projector. Enter the host name if it isrequired when using a DHCP server etc.2 [DHCP ON], [DHCP OFF]To enable the DHCP client function, set to [DHCP ON].3 [IP ADDRESS]Enter the IP address when not using a DHCP server.4 [SUBNET MASK]Enter the subnet mask when not using a DHCP server.5 [DEFAULT GATEWAY]Enter the default gateway address when not using a DHCPserver.6 [DNS1]Enter the DNS1 server address.Permissible characters for the entry of DNS1 server address(primary):Numbers (0 - 9), period (.)(Example: 192.168.0.253)7 [DNS2]Enter the DNS2 server address.Available characters for the entry of DNS2 server address(secondary):Numbers (0 - 9), period (.)(Example: 192.168.0.254)8 [Back], [Next]Click the [Back] button to return to the original screen. Click the[Next] button to display the setting confirmation screen. Clickthe [Submit] button to update the setting.Notef When you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. In that case, click[Network config] again since the following operation will not be guaranteed.f The connection may be disconnected when the LAN setting is changed while connected with LAN.
