Chapter 5 Operations — Web control functionENGLISH - 163[Basic control] pageClick [Projector control] → [Basic control].1234651 [POWER]Turns off/on the power.2 [SHUTTER]Switches whether to use the shutter function (enabled (shutter:closed)/disabled (shutter: open)).3 [OSD]Switches off (hide)/on (display) the on-screen display function.4 [SYSTEM]Switches the system method.5 On-screen display of the projectorDisplays the same items as shown on the on-screen displayof the projector. You can check or change the settings of themenus. It is displayed even if the on-screen display function isset to off (hide).6 [INPUT SELECT]Switches the input signal.(SDI input is supported only for PT-RZ770, PT-RZ660.)[Detail control] pageClick [Projector control] → [Detail control].435218976101 Control of the projectorThe projector is controlled by clicking the buttons in the sameway as the buttons on the remote control. After control, the on-screen display of the projector at the right of the control page isupdated.2 [SUB MEMORY]Switches the sub memory.3 [SYSTEM DAYLIGHT VIEW]Switches the system daylight view settings.4 [FREEZE]Temporarily pauses the image.5 [P IN P]Switches the P IN P setting.6 [WAVEFORM MONITOR]Displays the waveform of the input signal.7 [PROJECTION METHOD]Switches the setting of the projection method.8 [LENS]Adjusts the projection lens.9 [TEST PATTERN]Displays the test pattern.10 [GET OSD]Updates the on-screen display of the projector at the right of thecontrol page.
