Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 113[SHUTTER SETTING]Set the operation of the shutter function.Setting [FADE-IN] or [FADE-OUT]Set the image fade-in and fade-out when the shutter function operates.1) Press as to select [SHUTTER SETTING].2) Press the button.f The [SHUTTER SETTING] screen is displayed.3) Press as to select [FADE-IN] or [FADE-OUT].4) Press qw to switch the item.Item Adjustment[FADE-IN][FADE-OUT][OFF] Does not set fade-in or fade-out.[0.5s] - [10.0s]Sets the fade-in or fade-out time.Select an item from [0.5s] - [4.0s], [5.0s], [7.0s], or [10.0s]. [0.5s] -[4.0s] can be selected in increments of 0.5.Notef Press the button on the remote control or the control panel during fade-in or fade-out to cancel the fade operation.Setting [STARTUP]Automatically enable/disable the shutter function (shutter: closed/open) when the power is turned on.1) Press as to select [SHUTTER SETTING].2) Press the button.f The [SHUTTER SETTING] screen is displayed.3) Press as to select [STARTUP].4) Press qw to switch the item.[OPEN] The projector goes into projection mode with the shutter function disabled (shutter: opened) when thepower is turned on.[CLOSE] The projector goes into projection mode with the shutter function enabled (shutter: closed) when thepower is turned on.Setting the shutter synchronization functionThe shutter synchronization function is a function to synchronize the shutter operation of the specified projectorto other projectors, and the effect using the shutter function including the fade out/fade in operation can besynchronized.To use the shutter synchronization function, it is necessary to connect the projectors targeted for synchronizationin a loop with daisy chain connection using the terminal and the terminal. For details of how to connect the projectors, refer to“Connecting example when using the contrast synchronization function/shutter synchronization function”(x page 52).1) Press as to select [SHUTTER SETTING].2) Press the button.f The [SHUTTER SETTING] screen is displayed.3) Press as to select [MULTI PROJECTOR SYNC].4) Press the button.f The [MULTI PROJECTOR SYNC] screen is displayed.5) Press as to select [MODE].
