Panasonic PT-RZ570 Operating Instructions Manual

Also see for PT-RZ570: Operating instructions

Contents

Panasonic PT-RZ570 Operating Instructions Manual Manual pdf 117 page image

Chapter 4 Settings — [SIGNAL LIST] menuENGLISH - 117f In an environment where multiple types of signals are input to the same terminal, signals are sometimes not determined correctly when thesetting is set to [WIDE].Sub memoryThe projector has a sub memory function that can register the multiple image adjustment data, even if it isrecognized as the same signal by the frequency or format of the synchronization signal source.Use this function when you need to switch the aspect or adjust the picture quality such as the white balancewhile using the same signal source. The sub memory includes all the data that can be adjusted for each signal,such as the image aspect ratio and data adjusted in the [PICTURE] menu (items such as [CONTRAST] and[BRIGHTNESS]).Registering to the sub memory1) While in the normal screen (where no menu is displayed), press as.f The sub memory registration screen is displayed if the sub memory is not registered. Proceed to Step 3).f A list of sub memories registered to the signal currently input is displayed.f The button on the remote control can be used instead of as when [SUB MEMORY] isselected from the [PROJECTOR SETUP] menu → [FUNCTION BUTTON].2) Press asqw to select the sub memory number to register in [SUB MEMORY LIST].3) Press the button.f The [SIGNAL NAME CHANGE] screen is displayed.4) Press asqw to select [OK], and press the button.f To rename the registered signal, follow the procedure in Steps 6) and 7) in “Renaming the registered signal”(x page 115).Switching to the sub memory1) While in the normal screen (where no menu is displayed), press as.f A list of sub memories registered to the signal currently input is displayed.2) Press asqw to select the signal to switch in [SUB MEMORY LIST].3) Press the button.f This switches to the signal selected in Step 2).Deleting the sub memory1) While in the normal screen (where no menu is displayed), press as.f The [SUB MEMORY LIST] screen is displayed.2) Press asqw to select the sub memory to be deleted, and press the button on theremote control.f The [REGISTERED SIGNAL DELETE] screen is displayed.f To cancel the deletion, press the button to return to the [SUB MEMORY LIST] screen.3) Press the button.f The selected sub memory will be deleted.