Chapter 4 Settings — [DISPLAY OPTION] menu86 - ENGLISHSetting [EDID MODE] in [HDMI IN]1) Press as to select [HDMI IN].2) Press the button.f The [HDMI IN] screen is displayed.3) Press as to select [EDID MODE] of [HDMI1] or [HDMI2].4) Press the button.f The [HDMI1] screen or the [HDMI2] screen is displayed.5) Press qw to switch the item.f The items will switch each time you press the button.[DEFAULT] Standard setting.[SCREEN FIT] Changes the EDID data according to the [SCREEN FORMAT] setting.[USER] Set the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items as EDID.f Proceed to Step 10) when [DEFAULT] or [SCREEN FIT] is selected.6) Press the button.f The [RESOLUTION] screen is displayed.7) Press asqw to select [RESOLUTION].f Select [1024x768p], [1280x720p], [1280x768p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p],[1440x900p], [1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].8) Press the button.f The [VERTICAL SCAN FREQUENCY] screen is displayed.9) Press qw to select [VERTICAL SCAN FREQUENCY].f Select [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].f Select [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].f Select [60Hz] or [50Hz] when anything other than following is selected for [RESOLUTION].g [1920x1080p], [1920x1080i]10) Press the button.f The confirmation screen is displayed.11) Press qw to select [OK], and press the button.Notef Settings in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] are displayed in the [HDMI IN] screen.f Setting of the resolution and the vertical scanning frequency may be necessary on the computer or video device in use.f The computer, video device, or projector in use may require the power to be turned off and on again after setting.f The output with the set resolution or vertical scanning frequency may not be possible depending on the computer or video device in use.[DIGITAL LINK IN]Set this item in accordance with the video signal input to the terminal.Setting [SIGNAL LEVEL] in [DIGITAL LINK IN]1) Press as to select [DIGITAL LINK IN].2) Press the button.f The [DIGITAL LINK IN] screen is displayed.3) Press as to select [SIGNAL LEVEL].4) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Automatically sets the signal level.
