Chapter 4 Settings — [POSITION] menu68 - ENGLISH[POSITION] menuOn the menu screen, select [POSITION] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen.Notef When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the LAN> terminal, adjust the shift, aspect, and clock phase from the menu of DIGITAL LINK output supported device at first.[SHIFT]Move the image position vertically or horizontally if the image projected on the screen is still out of position evenwhen the positions of the projector and screen are correct.1) Press as to select [SHIFT].2) Press the button.f The [SHIFT] screen is displayed.3) Press asqw to adjust the position.Orientation Operation AdjustmentVertical (up and down)adjustmentPress a. The image position moves up.Press s. The image position moves down.Horizontal (right and left)adjustmentPress w. The image position moves to the right.Press q. The image position moves to the left.Notef For the portrait setting, image position is moved horizontally when “Vertical (up and down) adjustment” is made. Image position is movedvertically when “Horizontal (right and left) adjustment” is made.[ASPECT]You can switch the aspect ratio of the image.The aspect ratio is switched within the screen range selected in the [DISPLAY OPTION] menu → [SCREENSETTING] → [SCREEN FORMAT]. Set [SCREEN FORMAT] first. (x page 80)1) Press as to select [ASPECT].2) Press qw or the button.f The [ASPECT] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[DEFAULT] Displays images without changing the aspect ratio of the input signals.[VID AUTO]*1 Identifies the video ID (VID) embedded in the video signal, and automatically switches the image sizebetween 4:3 and 16:9. This is enabled when NTSC signal is input.
