Chapter 4 Settings — [POSITION] menu70 - ENGLISH2) Press the button.f The [ZOOM] screen is displayed.3) Press as to select [MODE].4) Press qw to switch the item.[INTERNAL] Enlarges the size within the aspect range set with [SCREEN FORMAT].[FULL] Enlarges or reduces the size using the entire display area set with [SCREEN FORMAT].5) Press as to select [INTERLOCKED].6) Press qw to switch the item.[OFF] Sets the [VERTICAL] and [HORIZONTAL] zoom ratio.[ON] Uses [BOTH] to set zoom ratio. Image can be enlarged or reduced vertically and horizontally at thesame magnification.7) Press as to select [VERTICAL] or [HORIZONTAL].f If [ON] is selected, select [BOTH].8) Press qw to adjust.Notef When the [POSITION] menu → [ASPECT] is set to anything other than [DEFAULT], [MODE] is not displayed.[CLOCK PHASE]You can adjust the image to achieve an optimal image when there is a flickering image or smeared outlines.1) Press as to select [CLOCK PHASE].2) Press qw or the button.f The [CLOCK PHASE] individual adjustment screen is displayed.3) Press qw to adjust.f Adjustment value will change between [0] and [+31]. Adjust the image so that the amount of interference isat a minimum.Notef Adjustment may not be possible depending on the signal.f There may be no optimal value if the output from the input computer is unstable.f There may be no optimal value when the total dot number is shifted.f [CLOCK PHASE] can be adjusted when YCBCR /YPBPR signal or analog RGB signal is input to the terminal or the terminal.f [CLOCK PHASE] cannot be adjusted when a digital signal is input.f The adjustment value will change to [0] when w is pressed while it was at [+31]. Also, the adjustment value will change to [+31] when q ispressed while it was at [0].[SCREEN ADJUSTMENT]You can correct various types of distortion in a projected image.Unique image processing technology enables projection of a square image on a special screen shape.1) Press as to select [SCREEN ADJUSTMENT].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Does not perform [SCREEN ADJUSTMENT].[KEYSTONE] Adjusts any trapezoidal distortion in the projected image.[CORNER CORRECTION] Adjusts any distortion in the four corners of the projected image.[CURVED CORRECTION] Adjusts any curved distortion in the projected image.
