Chapter 4Settings—[SECURITY] menu120 - ENGLISH4)Press the button.fThe[CONTROL PANEL]screen or the[REMOTE CONTROL]screen is displayed.5)Pressasto select [CONTROL PANEL] or [REMOTE CONTROL].6)Pressqwto switch [USER].7)Pressasto select the button item to set.fWhen [INPUT SELECT BUTTON] is selected in [REMOTE CONTROL], press the button, andthen pressasto select the button to set.Buttons that can be set[CONTROL PANEL][REMOTE CONTROL][POWER BUTTON]Power <v/b>button[INPUT SELECT BUTTON] button button, button, button, button, button[MENU BUTTON][AUTO SETUP BUTTON]― button[ON SCREEN BUTTON]― button[OTHER BUTTON]asqw, buttonButtons not listed above8)Pressqwto switch the item.[ENABLE]Enables button operations.[DISABLE]Disables button operations.fFollowing items can be selected only when [COMPUTER1/2 BUTTON] is selected in [INPUT SELECTBUTTON].[TOGGLE]Switches between [COMPUTER1] and [COMPUTER2] when the button is operated.[COMPUTER1]Fixes to [COMPUTER1].[COMPUTER2]Fixes to [COMPUTER2].[DISABLE]Disables button operations.fWhen [INPUT SELECT BUTTON] is selected in Step7), pressing the [CONTROL PANEL]screen or the[REMOTE CONTROL]screen once the item is switched.9)Pressasto select [APPLY], and press the button.fThe confirmation screen is displayed.10)Pressqwto select [OK], and press the button.NotefWhen a button operation is performed on the device set to [DISABLE], the[CONTROL DEVICE PASSWORD]screen is displayed.Enter the control device password.fThe[CONTROL DEVICE PASSWORD]screen will disappear when there is no operation for approx. 10 seconds.fIf the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannotenter standby).fWhen the setting has completed, the menu screen will disappear. To operate continuously, press the menu.fEven when you set button operations on the remote control disabled, operations of the and buttons on the remotecontrol are kept enabled.[CONTROL DEVICE PASSWORD CHANGE]The control device password can be changed.1)Pressasto select [CONTROL DEVICE PASSWORD CHANGE].2)Press the button.fThe[CONTROL DEVICE PASSWORD CHANGE]screen is displayed.3)Pressasqwto select the text, and press the button to enter the text.4)Pressasqwto select [OK], and press the button.fTo cancel, select [CANCEL].
