Panasonic PT-RZ570 Operating Instructions Manual

Also see for PT-RZ570: Operating instructions

Contents

Panasonic PT-RZ570 Operating Instructions Manual Manual pdf 66 page image

Chapter 4 Settings — [PICTURE] menu66 - ENGLISHOperation Adjustment Range of adjustmentPress w. Contours become sharper. 0 - +15Press q. Contours become softer.Notef If you press w while the adjustment value is [+15], the value will become [0]. If you press q while the adjustment value is [0], the value willbecome [+15].[NOISE REDUCTION]You can reduce noises when the input image is degraded and noise is occurring in the image signal.1) Press as to select [NOISE REDUCTION].2) Press qw or the button.f The [NOISE REDUCTION] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[OFF] No correction.[1] Slightly corrects the noise.[2] Moderately corrects the noise.[3] Strongly corrects the noise.Attentionf When this is set for an input signal with less noise, the image may look different from the original image. In such a case, set it to [OFF].[DYNAMIC CONTRAST]Light adjustment of the light source is performed automatically according to the image to make the contrastoptimum for the image.1) Press as to select [DYNAMIC CONTRAST].2) Press qw or the button.f The [DYNAMIC CONTRAST] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Disables the dynamic contrast function.[ON] Executes the light adjustment of the light source.Notef The brightness control function and the dynamic contrast function will operate simultaneously, but the dynamic contrast function will notoperate while measuring the brightness and the color.[SYSTEM SELECTOR]The projector will automatically detect the input signal, but you can set the system method manually when anunstable signal is input. Set the system method matching the input signal.1) Press as to select [SYSTEM SELECTOR].2) Press the button.3) Press as to select a system format.f Available system formats vary depending on the input signal.Terminal System format

terminal*1Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or [PAL60].Select [AUTO] normally. ([AUTO] will automatically determine from [NTSC], [NTSC4.43], [PAL],[PAL-M], [PAL-N], [SECAM], or [PAL60].)Switch the setting to the appropriate TV signal format.