Chapter 4 Settings — [DISPLAY OPTION] menu80 - ENGLISH3) Press the button.f The [MEASURED MODE] screen is displayed.4) Press as to select [MEASURED DATA].5) Press the button.f The [MEASURED DATA] screen is displayed.6) Measure the current luminance (Y) and the chromaticity coordinates (x, y) using the colorimeter.7) Press as to select a color, and press qw to adjust the setting.f Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.8) Once all the input is completed, press the f The [MEASURED MODE] screen is displayed.9) Press as to select [TARGET DATA].10) Press the button.f The [TARGET DATA] screen is displayed.11) Press as to select a color and press qw to input coordinates for desired colors.f By setting [AUTO TESTPATTERN] to [ON], the test pattern for the selected color is displayed.12) Once all the input is completed, press the Notef Colors are not displayed properly when target data is a color outside the region of this projector.f Set the [AUTO TESTPATTERN] to [ON] to automatically display a test pattern for use in adjusting the selected adjustment colors.f The [AUTO TESTPATTERN] setting will change in conjunction with the setting in the [ADVANCED MENU] menu → [EDGE BLENDING] →[ON]/[USER] → [AUTO TESTPATTERN].f When using a colorimeter or similar instrument to take measurement, measure the colors displayed in [AUTO TESTPATTERN].f A difference in the color coordinates of target data and measurement value obtained from an instrument may occur for certain instrumentand measurement environment used.[COLOR CORRECTION]Colors can be adjusted and registered for each input signal format.1) Press as to select [COLOR CORRECTION].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Standard setting[USER]For each of the four signal formats of VIDEO, Y/C, RGB, and YCB CR /YPBPR , six colors of red, green,blue, cyan, magenta, and yellow can be adjusted and registered. Press the button and setthe details. Adjustment is possible within the range of - 31 to +31.[SCREEN SETTING]Set the screen size.Correct to the optimum image position for the set screen when the aspect ratio of a projected image is changed.Set as necessary for the screen in use.1) Press as to select [SCREEN SETTING].2) Press the button.f The [SCREEN SETTING] screen is displayed.3) Press qw to switch the [SCREEN FORMAT] item.f The items will switch each time you press the button.[SCREEN FORMAT] Range when [SCREEN POSITION] is selected[16:10] Cannot be adjusted.[4:3] Adjusts the horizontal position between -160 and 160.[16:9] Adjusts the vertical position between -60 and 60.
