Chapter 4 Settings — [DISPLAY OPTION] menu82 - ENGLISH[OFF] Does not perform automatic adjustment.Adjusting signal level automatically1) Press as to select [AUTO SETUP].2) Press the button.f The [AUTO SETUP] screen is displayed.3) Press as to select [SIGNAL LEVEL ADJUST].4) Press qw to switch the item.[OFF] Does not perform automatic adjustment.[ON] Adjusts black level (the [PICTURE] menu → [BRIGHTNESS]) and white level (the [PICTURE] menu→ [CONTRAST]) when automatic setup is executed.Notef [SIGNAL LEVEL ADJUST] may not function properly unless a still image containing clear blacks and whites is input.[COMPUTER IN/OUT]Set the terminal and the terminal.Setting [INPUT SETTING] in [COMPUTER IN/OUT] (COMPUTER1 input)1) Press as to select [COMPUTER IN/OUT].2) Press the button.f The [COMPUTER IN/OUT] screen is displayed.3) Press as to select [INPUT SETTING].4) Press qw to switch the item.f The items will switch each time you press the button.[RGB/YPB PR ] Select this item when RGB signal or YCBCR /YPB PR signal is input to the terminal.[Y/C] Select this item when a luminance signal and color signal are input to the terminal.Notef Use the optional D-SUB - S Video conversion cable (Model No.: ET-ADSV) when the Y/C signal is input to the terminal.For connection method, refer to “Connecting example: AV equipment” (x page 35).Switching the slice level of an input synchronization signal1) Press as to select [COMPUTER IN/OUT].2) Press the button.f The [COMPUTER IN/OUT] screen is displayed.3) Press as to select [SYNC SLICE LEVEL] of [COMPUTER1] or [COMPUTER2].4) Press qw to switch the item.[LOW] Set the slice level to [LOW].[HIGH] Set the slice level to [HIGH].Notef [SYNC SLICE LEVEL] of [COMPUTER2] cannot be set when [COMPUTER2 SELECT] is set to [COMPUTER1 OUT].
