Section 700 - Operation Chapter 4. User MaintenanceICX-40-700 ICX (International) issued December 1999 4-5OperationTo set a Call Forward Busy Destination Extension using either a large-display orsmall-display phone:Set Call Forward ID Codes for Voice MailDescription(For a description of Call Forward ID codes for Voice Mail, see “Call Forward ID Code for VoiceMail” on page 3-47.)Voice Mail Call Forward ID codes are used by voice mail systems to identify the correct mail box forstoring messages. The actual entry needed will vary by voice mail systems and configuration. Oftenthe entry is the extension number.Action Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 4-3.)81-User MAINT displays2. At the 81 level, enter 09.3. Press the HOLD key. 8109-TRF of CFWD displays4. Enter 0.5. Press the HOLD key. CFWD-Busy EXT # displays6. Dial the extension number.7. Press the HOLD key. Enter CODE displays8. Enter the destination extension.9. Press the HOLD key to store the entry. Next extension number displays10. To set Call Forward Busy destinations for additionalextensions, press the volume up and down key or press theHOLD key to move to the desired Extension.11. Repeat steps 9-11 until all extension are entered.12. Press the MEMORY key to exit the entry mode.13. To return to the top menu level (81), press the PROG key.OR...To exit the User Maintenance mode, press the ON/OFFkey.81-User MAINT displaysOR...ON/OFF LED goes off
