4-32 ICX (International) issued December 1999 ICX-40-700Chapter 4. User Maintenance Section 700 - OperationSet System Speed Dial NumbersDescriptionFor a description of System Speed Dial (SSD), see “System Speed Dial” on page 5-74 for a DigitalKey Telephone, “System Speed Dial” on page 6-38 for a Digital Single Line Telephone (DSLT), and“System Speed Dial” on page 7-31 for a Single Line Telephone (SLT).OperationTo set SSD numbers:10. Use the bottom row of FF keys to select a single letter.• See Example 1. Large-display phone on page 4-17.• See Example 2. Small-display phone on page 4-18.Notes:• Press the * key to erase a single entry.• Press the # key to enter a space.11. Repeat steps 9-10 as many times as necessary to enter thedesired SSD name.Note: Press the FL/R key to clear the entire entry.12. Press the HOLD key to store the entry. Next SSD bin number displays13. To set additional SSD names, press the volume up or downkey or press the HOLD key to move to the desired SSD.Desired SSD bin number displays14. Repeat steps 9-13 until all SSD names are entered.15. Press the MEMORY key to exit the entry mode. Enter SSD # displays16. To return to the top menu level (81), press the PROG key.OR...To exit the User Maintenance mode, press the ON/OFFkey.81-User MAINT displaysOR...ON/OFF LED goes offAction Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 4-3.)81-User MAINT displays2. At the 81 level, enter 02.3. Press the HOLD key. 8102-SSD Assignment displays4. Press the HOLD key. 0 :SSD Number displays5. Press the HOLD key. Enter SSD # displaysAction Result
