Section 700 - Operation Chapter 4. User MaintenanceICX-40-700 ICX (International) issued December 1999 4-33Set Text Message RepliesVersion 3.0 or HigherDescriptionThis menu item specifies reply text messages.OperationTo set Text Message Replies using either a large-display or small-display phone:6. Enter the SSD bin number (00-79 or 000-799).7. Press the HOLD key. -SSDXXX XXX displays (whereXXX = SSD bin number)8. Enter the SSD digits to be dialed.Note: Press the FL/R key to clear an entry or any existingdata.9. Press the HOLD key to store the entry. Next SSD bin number displays10. To set additional SSD numbers, press the volume up ordown key or press the HOLD key to move to the desiredSSD.Desired SSD bin number displays11. Repeat steps 8-10 until all SSDs are entered.12. To return to the top menu level (81), press the PROG key.OR...To exit the User Maintenance mode, press the ON/OFFkey.81-User MAINT displaysOR...ON/OFF LED goes offAction Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 4-3.)81-User MAINT displays2. At the 81 level, enter 11.3. Press the HOLD key. 8111-Text Message displays4. Enter 1.5. Press the HOLD key. 8111-1:Reply Message displays6. Press the HOLD key. Enter Msg # displays7. Enter the Message number (0-9).Action Result
