Section 700 - Operation Chapter 4. User MaintenanceICX-40-700 ICX (International) issued December 1999 4-31Set System Speed Dial NamesDescriptionFor a description of System Speed Dial (SSD), see “System Speed Dial” on page 5-74 for a DigitalKey Telephone, “System Speed Dial” on page 6-38 for a Digital Single Line Telephone (DSLT), and“System Speed Dial” on page 7-31 for a Single Line Telephone (SLT).OperationTo set SSD names using either a large-display or small-display phone:15. Press the MEMORY key to exit the entry mode. Enter SSD # displays16. To return to the top menu level (81), press the PROG key.OR...To exit the User Maintenance mode, press the ON/OFFkey.81-User MAINT displaysOR...ON/OFF LED goes offAction Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 4-3.)81-User MAINT displays2. At the 81 level, enter 02.3. Press the HOLD key. 8102-SSD Assignment displays4. Enter 1.5. Press the HOLD key. 1 :SSD Name displays6. Press the HOLD key. Enter SSD # displays7. Enter the SSD bin number (00-79 or 000-799).8. Press the HOLD key. A B C D E F XXX displays (whereXXX = SSD bin number)9. Enter the SSD name:• If using a large-display phone, press the soft key nextto the desired row of letters. (See Example 1 on page4-17.)• If using a small-display phone press the appropriateone-touch key. (See Example 2 on page 4-18.)Note: Press the FL/R key to clear any existing data.Action Result
