4-10 ICX (International) issued December 1999 ICX-40-700Chapter 4. User Maintenance Section 700 - OperationSet Exception Day ModeDescription(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page3-21.)You can specify exception days which allow for a range of days for the System to operate in the Nightmode. This is intended for extended holidays for business shut down periods that last for multipledays. You can specify up to 6 exception day periods.OperationTo set the Exception Day Modes:Wednesday 303 310 317 324 331Thursday 304 311 318 325 332Friday 305 312 319 326 333Saturday 306 313 320 327 334Action Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 4-3.)81-User MAINT displays2. At the 81 level, enter 07.3. Press the HOLD key. 8107-System Mode displays4. Enter 2.5. Press the HOLD key. 2-Mode Except Day displays6. Press the HOLD key. 200 :MMDDPTN 1 Start Day displays7. Enter the start date by month (two characters) and day (twocharacters) for Exception Period 1.Note: To clear an entry or existing data, press the FL/Rkey.8. Press the HOLD key. 201 :MMDDPTN 1 Stop Day displaysADDRESSESFOR THESEDAYS OF THEWEEK:-- DAY OCCURRENCE --(e.g., 1st Sunday=address 300; 2nd Sunday=address 307)1st 2nd 3rd 4th 5th
