4-8 ICX (International) issued December 1999 ICX-40-700Chapter 4. User Maintenance Section 700 - OperationOperationTo set a Caller ID Logging Extensions using either a large-display or small-displayphone:Set Day of Week ModeDescription(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page3-21.)The System allows you to specify up to 3 mode patterns. This menu item determines which pattern tofollow for a given week day in the month (i.e., first Monday, second Monday, etc.).Some bushiness may have special operating hours based on the day of the month. For instance, acompany may work half-days on the second Saturday of each month.5 1006 120Action Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 4-3.)81-User MAINT displays2. At the 81 level, enter 10.3. Press the HOLD key. 8110-CID Logging EXT displays4. Press the HOLD key. CID Logging # displays5. Enter log control number.6. Press the HOLD key.7. Dial the extension number.8. Press the HOLD key to store the entry. Next log control # displays9. To set CID Log for additional extensions, press the volumeup and down key or press the HOLD key to move to thedesired Extension.10. Repeat steps 6-8 until all extension are entered.11. Press the MEMORY key to exit the entry mode.12. To return to the top menu level (81), press the PROG key.OR...To exit the User Maintenance mode, press the ON/OFFkey.81-User MAINT displaysOR...ON/OFF LED goes offNumber of Cabinets Total Number ofCall Log Extensions
