Section 700 - Operation Chapter 4. User MaintenanceICX-40-700 ICX (International) issued December 1999 4-13Set Message Key ID CodeDescription(For a description of the Message Key ID Code Feature, see “Message Key ID Code” on page 3-48.)On a large display phone you can use a Message key to either retrieve voice mail messages or respondto telephone messages. To respond to voice mail messages from a 3rd party voice mail system, youneed to set the Message Key ID code to identify the caller to the voice mail system. You can also usethe Message key to program a voice mail password.OperationTo set the Message Key ID code:13. Repeat steps 8-12 until all extension names are entered.14. Press the MEMORY key to exit the entry mode. Enter EXT # displays15. To return to the top menu level (81), press the PROG key.OR...To exit the User Maintenance mode, press the ON/OFFkey.81-User MAINT displaysOR...ON/OFF LED goes offAction Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 4-3.)81-User MAINT displays2. At the 81 level, enter 06.3. Press the HOLD key. 8106-MSG Key ID Code displays4. Press the HOLD key. MSGID-EXT Number displays5. Dial the extension number of the phone being programmed.6. Press the HOLD key. MSG-ID EXT XXX displays (whereXXX = extension number)7. Enter the Message Key ID code.Notes: The ID code may contain up to 16 digits and contain0, 1-9, *, #, pause (REDIAL key).To clear an entry or existing data, press the FL/R key.8. Press the HOLD key to store the entry. Next extension number displays9. To set additional Message Key ID codes, press the volumeup or down key or press the HOLD key to move to thedesired extension.Desired extension number displays10. Repeat steps 7-9 until all Message Key ID codes are set.Action Result
