8-98.4 Operation Menu8.4.1 TerminalUsing this menu, you can send and receive character strings to/from the driver, monitor parameters/monitors aswell as errors/alarms, and use parameter/command help.Click ìTerminal (T)î under ìMainMenuî to display the ìTerminalî dialog box (see Figure 8.9).Figure 8.9 ìTerminalî dialog box[Sending/receiving character strings]1) Enter a character string in the input text field and press the Enter (Return) key. The character string is sent tothe driver and, at the same time, displayed in the display text area.2) When a character string is received from the driver, it is displayed in the display text area.3) If you click ìResend (R),î the character string transmitted last time is sent again.4) If you click ìRe-edit (P),î the character string transmitted last time is displayed in the input text field.5) It is possible to display a maximum of ten transmitted character strings in the order of transmission in theinput text field by pressing the ↑ arrow key on the PC keyboard. By pressing the ↓ arrow key, the characterstrings displayed by pressing the ↑ arrow key can be displayed in the reverse order.Input text fieldDisplay text area8
