Chapter 6: USB Profiles109CIM CompatibilityIn order to make use of USB profiles, you must use a virtual media CIMwith updated firmware. For a list of virtual media CIMs, see SupportedComputer Interface Module (CIMs) Specifications (on page 289).A CIM that has not had its firmware upgraded supports a broad range ofconfigurations (keyboard, mouse, CD-ROM, and removable drive), butwill not be able to make use of profiles optimized for particular targetconfigurations. Given this, existing CIMs should be upgraded with latestfirmware in order to access USB profiles.Until existing CIMs are upgraded, they will be able to providefunctionality equivalent to the ‘Generic’ USB profile.CIM firmware is automatically upgraded during a firmware upgrade, butCIMs that have not had their firmware upgraded can be upgraded asdescribed in Upgrading CIMs (on page 245).Available USB ProfilesThe current release of the KX II comes with the selection of USB profilesdescribed in the following table. New profiles are included with eachfirmware upgrade provided by Raritan. As new profiles are added, theywill be documented in the help.USB profile DescriptionBIOS Dell® PowerEdge®1950/2950/2970/6950/R200Dell PowerEdge 1950/2950/2970/6950/R200 BIOSUse either this profile or 'Generic' profile for Dell PowerEdge1950/2950/2970/6950/R200 BIOS.Restrictions: NoneBIOS Dell OptiPlex ™Keyboard and Mouse OnlyDell OptiPlex BIOS Access (Keyboard and Mouse Only)Use this profile to have keyboard functionality for the DellOptiPlex BIOS when using D2CIM-VUSB. When using the newD2CIM-DVUSB, use 'Generic' profile.Notice: Optiplex 210L/280/745/GX620 requires D2CIM-DVUSB with'Generic' profile to support virtual mediaRestrictions: USB bus speed limited to full-speed (12 MBit/s) No virtual media supportBIOS Dell Optiplex 790 Use this profile for Dell Optiplex 790 during BIOS operations.Warning:
