Appendix A: Specifications305Supported Audio Device FormatsThe KX II supports one playback and capture device and one recorddevice on a target at a time. The following audio device formats aresupported: Stereo, 16 bit, 44.1K Mono, 16 bit, 44.1K Stereo, 16 bit, 22.05K Mono, 16 bit, 22.05K Stereo, 16 bit, 11.025K Mono, 16 bit, 11.025KAudio Playback and Capture Recommendations and RequirementsAudio Level Set the target audio level to a mid-range setting.For example, on a Windows® client, set the audio to 50 or lower.This setting must be configured through the playback or capture audiodevice, not from the client audio device control.Recommendations for Audio Connections when PC Share Mode is EnabledIf you are using the audio feature while running PC Share mode, audioplayback and capture are interrupted if an additional audio device isconnected to the target.For example, User A connects a playback device to Target1 and runs anaudio playback application then User B connects a capture device to thesame target. User A's playback session is interrupted and the audioapplication may need to be restarted.The interruption occurs because the USB device needs to bere-enumerated with the new device configuration.It may take some time for the target to install a driver for the new device.Audio applications may stop playback completely, go to the next track, orjust continue playing.The exact behavior is dependent on how the audio application isdesigned to handle a disconnect/reconnect event.
