Chapter 8: Device Management1572. Launch Internet Explorer® using the KX II IP address as the URL. ACertificate Error message will be displayed.3. Select View Certificates.4. On the General tab, click Install Certificate. The certificate is theninstalled in the Trusted Root Certification Authorities store.5. After the certificate is installed, the KX II IP address should beremoved from the Trusted Site zone.To enable AKC download server certificate validation:1. Choose Device Settings > Device Services. The Device ServiceSettings page opens.2. Select the Enable AKC Download Server Certificate Validationcheckbox or you can leave the feature disabled (default).3. Click OK.If you are connecting to a KX II standalone device and support for AKCdownload server certificate validation is enabled, the valid IPv6 format togenerate the certificate is either: CN =[fd07:02fa:6cff:2500:020d:5dff:fe00:01c0] whenthere is a leading 0or CN =[fd07:02fa:6cff:2500:020d:5dff:0000:01c0] whenthere is no zero compressionConfiguring SNMP AgentsSNMP-compliant devices, called agents, store data about themselves inManagement Information Bases (MIBs) and return this data to the SNMPmanagers. See Viewing the KX II MIB (on page 167) for information onviewing the KX II MIB.KX II supports SNMP logging for SNMP v1/v2c and/or v3. SNMP v1/v2cdefines message formats and protocol operations when SNMP logging isenabled. SNMP v3 is a security extension of SNMP that provides userauthentication, password management and encryption.To configure SNMP agents:1. Choose Device Settings > Device Services. The Device ServiceSettings page opens.2. Provide the following SNMP agent identifier information for the MIB-IISystem Group objects:a. System Name - the SNMP agent's name/device nameb. System Contact - the contact name related to the devicec. System Location - the location of the device
