Chapter 2: Installation and Configuration243. Choose Switch From in the Port Action menu. The new target serveryou selected is displayed.Disconnecting a Target ServerTo disconnect a target server: On the Port Access page, click the port name of the target you wantto disconnect from, then click Disconnect on Port Action menu whenit appears.Step 6: Configuring the Keyboard Language (Optional)Note: This step is not required if you are using the US/Internationallanguage keyboard.If you are using a non-US language, the keyboard must be configured forthe appropriate language.Additionally, the keyboard language for the client machine and the KVMtarget servers must match.Consult your operating system documentation for additional informationabout changing the keyboard layout.Changing the Keyboard Layout Code (Sun Targets)Use this procedure if you are using a DCIM-SUSB and want to changethe keyboard layout to another language.To change the keyboard layout code (DCIM-SUSB only):1. Open a Text Editor window on the Sun™ workstation.2. Check that the Num Lock key is active. then press the left Ctrl keyand the Del key on your keyboard, or select the option "set CIMkeyboard/Mouse options" from the keyboard menu.The Caps Lock light starts to blink, indicating that the CIM is inLayout Code Change mode.The text window displays: Raritan Computer, Inc. Currentkeyboard layout code = 22h (US5 UNIX).3. Type the layout code desired (for example, 31 for the Japanesekeyboard). Press Enter.4. Shut down the device and power on once again. The DCIM-SUSBperforms a reset (power cycle).5. Verify that the characters are correct.
