Chapter 3: Working with Target Servers60Audio is supported by KX II 2.4.0 (and later). Audio capture is supportedby KX II 2.5.0 (and later).AudioiconsIcon name DescriptionSpeaker These icons are located in status bar at thebottom of the client window.Green, blinking waves indicate an audioplayback session is currently streaming.A black speaker icon is displayed when thesession is muted.The icon is grayed out when no audio isconnected.Microphone These icons are located in the status bar at thebottom of the client window.Red, blinking waves indicate an audio capturesession is currently underway.The Speaker icon, indicating a playback sessionis streaming, is also displayed when a session isunderway.A black Microphone icon is displayed when thesession is muted.When the Microphone icon is grayed out, noaudio is connected.Keyboard OptionsKeyboard MacrosKeyboard macros ensure that keystroke combinations intended for thetarget server are sent to and interpreted only by the target server.Otherwise, they might be interpreted by the computer on which theVirtual KVM Client is running (your client PC).Macros are stored on the client PC and are PC-specific. Therefore, if youuse another PC, you cannot see your macros.In addition, if another person uses your PC and logs in under a differentname, that user will see your macros since they are computer-wide.Keyboard macros created in the Virtual KVM Client are available inMulti-Platform Client (MPC) and vice versa. However, keyboard macroscreated in Active KVM Client (AKC) cannot be used in VKC or MPC, andvice versa.
