Appendix E: Informational Notes3513. Restart the X server.With this change, the internal video mode timing from the X server isused and corresponds exactly with the VESA video mode timing,resulting in the proper video display on the KX II.List of Supported Target Video Resolutions Not DisplayingWhen using a CIM, there are some video resolutions, as listed in KX IIISupported Target Server Video Resolutions, that may not be available bydefault for selection.To view all available video resolutions if they do not appear:1. Plug the monitor in.2. Next, unplug the monitor and plug in the CIM. All video resolutionswill not be available and can be used.AudioAudio Playback and Capture IssuesFeatures that May Interrupt an Audio ConnectionIf you use any of the following features while connected to an audiodevice, your audio connection may be interrupted. Raritan recommendsyou do not use these features if you are connected to an audio device: Video Auto-Sense Extensive use of the local port Adding usersIssues when Using a Capture Device and Playback DeviceSimultaneously on a TargetOn some targets, the simultaneous connection of capture devices andplayback devices may not work due to the USB hub controller and how itmanages the USB ports. Consider selecting an audio format thatrequires less bandwidth.If this does not resolve the issue, connect the D2CIM-DVUSB CIM'skeyboard and mouse connector to a different port on the target. If thisdoes not solve the problem, connect the device to a USB hub andconnect the hub to the target.
