Chapter 13: KX II Local Console2823. In the Apply Selected Scripts to Ports section, select the target(s)you want to apply the script to using Select All or clicking on thecheckbox to the left of each target to apply the script to only selecttargets.4. Click Apply Scripts. Once the script is added to the target, it appearsunder the Scripts Currently in Use column in the Apply SelectedScripts to Ports section.To remove a script from targets:1. In the Apply Selected Scripts to Ports section, select the target(s)you want to remove the scripts from using Select All or clicking onthe checkbox to the left of each target to remove the script from onlyselect targets.2. Click Remove Connect Scripts to remove connect scripts or clickRemove Disconnect Scripts to remove disconnect scripts.Adding ScriptsNote: You can also add scripts that were created outside of KX II andimport them as XML files. See Importing and Exporting Scripts (onpage 215).To create script:1. Click Device Settings > Connection Scripts. The Connection Scriptspage opens.2. In the Available Connection Scripts section, click Add. The AddConnection Script page opens.3. Enter a name for the script up to 32 characters in length. This nameis displayed in the Available Connection Scripts section of theConfigure Scripts page once the script is created.4. Select either Connect or Disconnect as the type of script you arecreating. Connect scripts are used on a new connection or whenswitching to a target.5. Select the keyboard type required for the target you are using.6. From the Key Sets drop-down, choose the keyboard key set youwant to use to create the script. Once selected, the Add box belowthe Key Sets drop-down is populated with the selected key setoptions.7. Select a key from the Add box and click Add to move it to Script box.Remove a key from Script box by selecting it clicking Remove.Reorder keys by selecting them and using the Up and Down icons.The script can consist of one or more keys. Additionally, you can mixand match the keys to be used in the script.
