Chapter 3: Working with Target Servers38Port Access Page (Remote Console Display)After successfully logging on to the KX II remote console, the View byPort tab on the Port Access page appears. This page lists all of the KX IIports, and the target servers, port groups, and blade chassis that areconnected to those ports.The information is sorted by Port Number by default, but you can changethe display to sort on any of the available columns by clicking on acolumn header. To increase or decrease the number of rows displayedon a tab at one time, enter the number of row in the Rows per Page fieldand click Set.The following information for each port is contained on this page: Port Number - Numbered from 1 to the total number of portsavailable for the KX II device.Note: Ports connected to power strips are not listed, resulting in gapsin the Port Number sequence. Port Name - The name of the KX II port. Initially, this is set toDominion-KX2-Port# but you can change the name to somethingmore descriptive. When you click a Port Name link, the Port ActionMenu appears.Note: Do not use apostrophes for the Port (CIM) Name. Type - The type of server or CIM/DCIM.For blade chassis, the type can be Blade Chassis, Blade,BladeChassisAdmin, and BladeChassisURL.Dual video port groups appear on the Port Access page as Dual Porttypes.The primary and secondary ports that are a part of the port groupappear on the Port Access page as Dual Port(P) and Dual Port(S),respectively. For example, if the CIM type is DCIM, "DCIM Dual Port(P)" is displayed.
