OfficeServ 7100 USER INSTRUCTIONSTECHNICAL MANUAL PART 1 MAY 20091.51.4 CALL FORWARDINGThe OfficeServ 7100 allows the system administrator to program the call forwarddestinations for other station users. This MMC also allows call forward to be set afterthe destination has been entered.The OfficeServ 7100 system allows four types of call forwarding: FORWARD ALL,FORWARD NO ANSWER, FORWARD BUSY, and FORWARD DND. There is anadditional option, FORWARD BUSY/NO ANSWER, that allows both of these options tobe activated at the same time, provided that destinations have been entered for both.The destinations for all these forwards can be either an internal number or an externalnumber.0 = FORWARD CANCEL 3 = NO ANSWER1 = ALL CALL 4 = BUSY/NO ANSWER2 = BUSY 5 = FORWARD DND6 = FOLLOW ME0 = FORWARD CANCEL This option will cancel any call forwarding set in MMC102. It will not remove the programmed destination andwill not override any preset forward settings in MMC 316.1 = ALL CALL This option, when set, will forward all calls to theprogrammed destination. If the programmed destinationis a station then that station can call the forwardedstation to put calls through.2 = BUSY This option, when set, will forward calls to theprogrammed destination when the forwarded keyset isbusy.3 = NO ANSWER This option, when set, will forward calls to theprogrammed destination if the forwarded stationdoes not answer a call before the forward no answertimer in MMC 502 expires.4 = BUSY/NO ANSWER This option will activate both the BUSY option and theNO ANSWER option at the same time.5 = FWD DND This option will forward all calls to the programmeddestination whenever the forwarded station goes intoDND.6 = FOLLOW ME This option will forward all calls from another station tothis one.
