OfficeServ 7100 USER INSTRUCTIONSTECHNICAL MANUAL PART 1 MAY 20091.81.6 PROGRAMMING YOUR STATION’S NAMENames are written using the keypad. Each key press selects a character. Pressing thedial pad key moves the cursor to the next position. For example, if the directory name is“SAM SMITH,” press the number “7” four times to get the letter “S.” Press the number“2” once to get the letter “A.” Continue selecting characters from the table below tocomplete your message. Pressing the bottom left programmable key will change theletter from upper case to lower case. There are up to 11 characters that can be used.NOTES:1. When the character you want appears on the same dial pad key as the previouscharacter, press the VOLUME UP or DOWN keys to move the cursor to the rightor to the left.2. When the system is equipped with a Samsung Voicemail System, and yourSystem Administrator has enabled it, changing the station name here will alsoupdate the name in your voicemail box.• iDCS KEYSETS and ITP KEYSETSCOUNT 1 2 3 4 5DIAL 0 < > . ) 0DIAL 1 space ? , ! 1DIAL 2 A B C @ 2DIAL 3 D E F # 3DIAL 4 G H I $ 4DIAL 5 J K L % 5DIAL 6 M N O ^ 6DIAL 7 P Q R S 7DIAL 8 T U V 4 8DIAL 9 W X Y Z 9DIAL 4 : = [ ] 4The # key can be used for the following special characters: #, space, &, !, :, ?, ., %,$, -, <, >, /, =, [, ], @, ^, (, ), _, +, {, }, |, ;, \, " and ~.1. When the character you want appears on the same dial pad key as the previouscharacter, press UP to move the cursor one space to the right.2. Other symbols are available for DIAL #.