112• Record Audio Settings: allows you to set up a recording preset:Default Name and Recording Time (1 minute, 2 minutes, 3minutes, 4 minutes, 5 minutes, 60 minutes, or Limit for MMS).3. Press the Stop soft key to stop the recording or pause therecording by pressing . Once the audio recording isstopped, the message is automatically saved.4. Press the Options soft key to display the following options:• Play: allows you to play the memo.• Record: allows you to save the current memo and begin anothersession.• My Voice Clips: allows you to listen to your audio clips.• Record Audio Settings: allows you to set up a recording preset:Default Name and Recording Time (1 min, 2 min, 3 min, 4 min, 5min, or 60 min, Limit for MMS).• Send via: allows you to send your voice clip to other people byusing a message or to a Bluetooth device.• Set as: allows you to set the audio file as a call ringtone, a ringtonefor a specific caller, or an alarm tone.• Delete: allows you to delete the memo.• More: gives you the following options:– Rename: allows you to change the memo’s name.– Lock/Unlock: allows you to lock/unlock the Audio file. Lock preventsthe audio file from being deleted, Unlock allows it to be deleted.– Bluetooth Visibility: allows you to make the audio file visible to aBluetooth device.– Properties: displays the Name, Size, Format, Duration, Forwarding,Creation Date and Time, and Location of the voice memo.5. To exit, press the Back soft key or press .Recorded Audio FolderThis folder shows a list of audio clips that have been recordedand saved. To access this folder, use the following steps:1. When the Idle screen displays, press the Menu soft key,then select My Stuff ➔ Tools ➔ Audio ➔ RecordedAudio. A list of voice memos displays.2. Select a recorded memo.3. To play a recording, press the Options soft key and pressPlay, or press .4. To exit, press the Back soft key or press .AlarmsThis feature allows you to:• set the alarm to ring at a specific time.• set the phone to switch on automatically and ring the alarm even if thephone is switched off.To set the alarm: