Samsung SGH-A767 Series User Manual

Contents

126Changing the WAP ProfilesYour phone is wirelessly connecting to the Internet via a built inWAP browser. Connection can be made via either one of threeavailable connection profiles: MEdia Net, AT&T MMS (MultiMediaServer), or AT&T IMS. Use this menu to create and customize theprofiles containing the settings for connecting your phone to thenetwork. You need these settings to use the WAP browser or tosend MMS messages or Email messages. Although the activeconnection can be changed by the user, it is recommended thatthis choice be made with the assistance of either the retailer orcustomer service representative.1. In Idle mode, press the Menu soft key, then select MEdiaNet ➔ Browser Settings.2. Use the Up or Down Navigation key to highlight one ofthese connection profiles:• MEdia Net• AT&T MMS• AT&T IMSCaution!: The WAPs are pre-configured and can not be altered using thisscreen. The MMS connection option can be edited, renamed, ordeleted using this screen. Your phone is set up by default forconnecting to the network.If you change the settings without first checking with your serviceprovider, the web browser, MMS, and e-mail features may notwork properly.3. To create a new connection profile, press the Options softkey and select New.- or -To edit an existing profile, highlight the profile, press theOptions soft key, and select Edit.4. Select each parameter you want to edit:• Set Name: enter a profile name.• Access Name: edit the access point name.• Auth Type: select the type of authentication used for this WAPconnection: None, Normal, or Secure.• User ID: enter the User ID required to connect to the network.• Password: enter the user password required to connect to thenetwork.• Protocol: set the connection protocol used by the WAP browser:WAP or HTTP.• Home URL: enter the URL address of the page to be used as yourhomepage.• Gateway address: (WAP only) enter the gateway address of theproxy server.• Proxy address: (HTTP only) set the proxy server address and port.