Call Functions 29• Last Data Call: shows the time used for the last data call sent orreceived since the last time this counter was reset.• Total Data Call: shows the total time used to send or receive datasince the last time this counter was reset.2. Use the Up and Down Navigation keys to scroll through theinformation.3. To set the counter back to zero, press the Reset soft key.You will be prompted for a password.4. Enter the password and press the OK soft key or thekey.5. Press the Back soft key or press to exit.Options During a CallYour phone provides a number of control functions that you canuse during a call.Adjusting the Call VolumeDuring a call, if you want to adjust the earpiece volume, use theVolume keys on the left side of the phone.Press to increase the volume level and press to decreasethe volume level.In Idle mode, you can also adjust the ringer volume using thesesame keys.Putting a Call on HoldYou can place the current call on hold whenever you want. Youcan also make another call while you have a call in progress ifyour network supports this service.To put a call on hold:1. While on a call, press Options soft key, then select Hold.This action places the current caller on hold (which isdisplayed onscreen as a greyed-out box).2. You can later reactivate this call whenever you want bypressing the Resume soft key.To make a new call while you have a call in progress:1. While on a call, press the Options soft key, then selectHold.2. Enter the new phone number you wish to dial or look it upin the Address Book.3. Press to dial the second number.- or -4. Press the Options soft key, then select New Call. Onceconnected, both calls are displayed on the screen.
