Samsung iDCS Release 2/OfficeServ User Manual

Also see for iDCS 500 Release 2/OfficeServ: User guide

Contents

35AUTOMATIC REDIAL/RETRYWhen you are making an outside call and you receive a busy signal, the system canautomatically redial the number for you. It will automatically redial at a pre-pro-grammed interval for up to 15 attempts.• When you hear a busy signal, press the AUTO-RETRY button.• The system will reserve the line and automatically redial the same number foryou. You will hear the call being made through the keyset speaker. The micro-phone is muted.• When the called party answers, lift the handset or press the flashing SPEAK-ER to begin speaking.NOTES:1. If you make another call, auto-redial is canceled.2. To cancel an auto-retry, lift and replace the handset.PULSE TO TONE CHANGEOVERWhen making an outside call on a dial pulse line, press #. All digits dialed after the# with be sent as tones.MEMO REDIALINGWhen you are calling directory information, you can store the number you aregiven using the SAVE feature. There is no need for pencil and paper.• While you are talking on an outside call, press SAVE.• Dial the telephone number as it is dictated to you on the key pad.• Press SAVE to store the number.To dial the number, press the SAVE/REPEAT button. It will select the same line anddial the stored number. If necessary, you can select a different line and then pressthe SAVE/REPEAT button.36PAGING AND MESSAGINGMAKING AN INTERNAL PAGETo make an announcement through the keyset speakers in the idle condition:• Lift the handset.• Press the PAGE button or dial 55.• Dial the desired zone number 0, 1, 2, 3 or 4.• After the attention tone, make your announcement.NOTE: If you have a dedicated page zone button, it is not necessary to press PAGEand dial a zone number.MAKING AN EXTERNAL PAGETo make an announcement through the external paging speakers:• Lift the handset.• Press the PAGE button or dial 55.• Dial the desired zone number 5, 6, 7 or 8—OR—dial 9 to page all externalzones.• After the attention tone, make your announcement.NOTE: If you have a dedicated page zone button, it is not necessary to press PAGEand dial a zone number.ALL PAGETo page all designated keysets in internal zone 0 and all external zones at the sametime:• Lift the handset.• Press the PAGE button or dial 55.• Dial 4 or press the ALL PAGE button.• After the attention tone, make your announcement.NOTE: The indicator on the PAGE button will be lit steady when an All Page is inprogress.MEET ME PAGE• Lift the handset.• Press the Meet Me Page (MMPG) button or dial 54.• Dial the desired zone number.• After the attention tone, instruct the paged person to dial 56.