Samsung iDCS Release 2/OfficeServ User Manual

Also see for iDCS 500 Release 2/OfficeServ: User guide

Contents

CUSTOMIZING YOUR KEYSETAME PASSWORDThis feature allows people using the AME feature to enable password protection.This will prevent unauthorized people from listening to your messages being left.The passcode is the same as your station passcode. This feature only applies ifthere is a SVM card installed in the system and your keyset has a programmedAME button.• With the handset on-hook, press TRANSFER and then dial 110.• Dial 101 to turn on AME PASSCODE or 100 to turn it off.• Press TRANSFER to store your selection.From the LCD:• Press MENU button.• Scroll to CONFIGURATION option and press ENTER.• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 0 andimmediately enter the option.• Scroll to AME password and press ENTER to change status.• Press CANCEL to return to the Main Option Page—OR—press END to returnto the idle screen.AUTO CAMP-ONThis option allows intercom calls to be automatically camped on, if possible, whena busy station is called.• With the handset on-hook, press TRANSFER and then dial 110.• Press 081 to turn CAMP-ON on or 080 to turn it off.• Press TRANSFER to store your selection.From the LCD:• Press MENU button.• Scroll to CONFIGURATION option and press ENTER.• Scroll to STATION ON/OFF and press ENTER—OR—you may dial 0 andimmediately enter the option.• Scroll to AUTO CAMP-ON and press ENTER to change status.• Press CANCEL to return to the Main Option Page—OR—press END to returnto the idle screen.49 50SELECT RING TONEEach keyset user can select any one of eight ring frequencies.• While on-hook, press TRANSFER and then dial 111.• Dial 1–8 or press the UP and DOWN keys to hear each tone.• When you hear the tone that you prefer, press TRANSFER to save it.NOTE: Specific lines or stations may be programmed to ring with a differenttone than what you have selected for your keyset.From the LCD:• Press MENU button.• Scroll to VOLUME option and press ENTER.• Scroll to RING TYPE and press ENTER—OR—you may dial 1 and immediate-ly enter the option.• Scroll to RIGHT/LEFT to choose tone and press ENTER at the desired tone.• Press CANCEL to return to the Main Option Page—OR—press END to returnto idle screen.CHANGE YOUR PASSCODEFrom the factory, your station passcode is 0000.You can change your station pass-code whenever you desire.• While on-hook, press TRANSFER and then dial 101.• Dial your old passcode.• Dial a new passcode (must be four characters). You can use 0–9.• Redial the new passcode to verify. If successful, you will hear two beeps. Fourbeeps indicate an incorrect code. Reenter the code again.• Press TRANSFER to store the new passcode.From the LCD:• Press MENU button.• Scroll to CONFIGURATION option and press ENTER.• Scroll to PASSWORD and press ENTER—OR—you may dial 1 and immediate-ly enter the option.• Enter CURRENT PASSWORD, press ENTER.• Enter NEW PASSWORD and press ENTER.• Enter NEW PASSWORD again, for confirmation and press ENTER.• Press CANCEL to return to the Main Option Page—OR—press END to returnto idle screen.