Samsung iDCS Release 2/OfficeServ User Manual

Also see for iDCS 500 Release 2/OfficeServ: User guide

Contents

3TERMINAL STATUS INDICATORThe terminal status indicator light is positioned on the top right corner of the key-set above the display. The terminal status indicator is a tri-colored (red, green, andamber) light that provides greater visibility of your keysets status than the indi-vidual button LEDs. The terminal status indicator provides the following indica-tions:• Busy/Off Hook Steady Red• Intercom Ring Flashing Red• Outside Call Ring Flashing Blue• Recall Ring Flashing Amber• Message Waiting Flashing Red• Do Not Disturb Fast Flash Red at 1 Second IntervalsSELECT BUTTONSThe 5012L keysets incorporate twelve select buttons. These buttons are posi-tioned six on either side of the LCD screen.The top left and right buttons are used to access the various levels of the userscreens.The 5012L has ten levels of programmable feature screens. By pressing thetop left (DOWN arrow) you progressively increase the screen level number [1-10].By pressing the top right (UP arrow) you progressively decrease the screen levelnumber [10-1].The remaining five buttons on either side of the display are programmable. Thereare ten programmable buttons per programmable feature screen, with the excep-tion of the last screen, which has nine programmable buttons. The total program-mable buttons per 5012L station is ninety-nine. Any system feature or function canbe assigned to these buttons.VOLUME CONTROLSThe 5012L keysets use the UP and DOWN buttons to adjust the ringer volumewhile the keyset is ringing, the speaker volume while the speakerphone is in useand the handset volume while you are listening. These three levels will be storedin memory until changed. If background music is turned on at your keyset, the vol-ume buttons will also control the level of music. The volume of pages heardthrough the speaker of a keyset can be adjusted during a page announcement byusing the volume buttons.There are 16 levels for each volume setting.The volumeof off-hook ring is controlled by a user-programmable setting.4SCREEN BUTTONThe 5012L incorporates a SCREEN button. This button allows you to choose yourkeyset’s idle screen display. The default is CALENDAR. The options are STATIONFIXED FEATURE buttons (two levels), or STATION PROGRAMMABLE buttons(ten levels).NOTE:From the default CALENDAR screen:• Press the SCREEN button once to access the STATION PROGRAMMABLEBUTTON SCREEN #1. Press the DOWN arrow associated with the top left softkey and you will advance to STATION PROGRAMMABLE SCREEN #2. Eachadditional press of the DOWN arrow will advance you through the screens,until you reach SCREEN #10. Press the UP arrow associated with the top leftsoft key to return to the previous screen. Each additional press of the UP but-ton will move you back towards the main screen.• Press the SCREEN button twice to access the STATION FIXED FEATURESCREEN #1. Press the DOWN arrow associated with the top left soft key andyou will advance to SCREEN #2.CONFERENCE BUTTONThe CONFERENCE button allows the user to set up a call with up to five parties(station or trunk).TRANSFER BUTTONTRANSFER is used to send any call to another extension in one of two ways. Youcan do a screened transfer by informing the other extension who is calling or youcan do a blind transfer without notification.HOLD BUTTONThe HOLD button maintains the call at your keyset, while enabling you to callother stations or consult coworkers in confidence.SPEAKER BUTTONThe SPEAKER button allows you to have a conversation from the keyset withoutlifting the handset.