75GETTING STARTEDUsing your new SVM/SVMi E-Series Subscriber Services is as simple as following afew simple spoken instructions. First time users should read this section as a tuto-rial. You should start with the following steps:• Access your Subscriber Services Menu - You already know how to do this.From the Subscriber Services Menu:• Record a Primary/No-Answer Personal Greeting. Dial [5][1].• Record a Mailbox Greeting. Dial [5][7].• Change your access code (Password). Dial [#][7][1].• Record your name. Dial [#][7][2].• Enter your directory name. Dial [#][7][3].After you have completed the steps above your Subscriber Services are set up andready to use.LISTEN TO YOUR MESSAGESIf there are new messages in your mailbox your [VMMSG] key will be lit. Call theSVM/SVMi E-Series by pressing this key, and when prompted enter your password.You will then be at the Subscriber Services Menu. Select [1] to listen to new mes-sages or [3] to listen to saved messages.Note: After you enter your password, if “Autoplay of New Messages”is enabled andyou have new messages the SVM/SVMi E-Series will begin to play them automat-ically. A subscriber can control this feature. From the Subscriber Services Menu [6][5] toggles “Autoplay of New Messages” ON/OFF.SUBSCRIBER SERVICES MENUThe following is a list of all the options available in the Subscriber Main Menu.1 LISTENING TO NEW MESSAGES11 GROUP NEW MESSAGES2 RECORD AND SEND A MESSAGE3 LISTENING TO OLD MESSAGES33 GROUP OLD MESSAGES4 ACCESS MANAGER5 PERSONAL GREETINGS6 MAILBOX ADMINISTRATION8 PAUSE / RESUME76