16 TASCAM DR-60D1 – IntroductionYou can use 64 MB–2 GB SD cards and 4 GB–32 GB SDHC cards withthis unit.A list of SD cards that have been confirmed for use with this unit canbe found on the TASCAM website (http://tascam.com/). Please checkthis site or contact TASCAM customer support.Precautions for useSD cards are delicate media. In order to avoid damaging a card orthe card slot, please take the following precautions when handlingthem.• Do not leave them in extremely hot or cold places.• Do not leave them in extremely humid places.• Do not let them get wet.• Do not put things on top of them or twist them.• Do not hit them.Precautions for installation• The unit’s nominal operating temperature is from 0º to 40º C(32º–104º F).• Do not install in the following types of places. Doing so coulddegrade the sound quality or cause malfunctions.• Places with significant vibrations• Near windows or other places exposed to direct sunlight• Near heaters or other extremely hot places• Extremely cold places• Places with high humidity or bad ventilation• Dusty places• Places directly exposed to rain or other water• Do not place this unit on top of a power amplifier or other devicethat generates heat.• If this unit is placed near a power amplifier or other device witha large transformer, it could cause that device to hum. If thisoccurs, increase the distance between this unit and the otherdevice.• If used nearby, this unit could cause color irregularities on a TVscreen or noise on a radio. If this occurs, increase the distancebetween this unit and the other device.• This unit might produce noise if a mobile phone or other wirelessdevice is used nearby to make calls or send or receive signals. Ifthis occurs, increase the distance between this unit and the otherdevice or turn off the other device.Beware of condensationIf the unit is moved from a cold to a warm place, or used immedi-ately after a cold room has been heated or otherwise exposed to asudden temperature change, condensation could occur. Should thishappen, leave the unit for one or two hours before turning the uniton.Cleaning the unitTo clean the unit, wipe it gently with a soft dry cloth. Do not wipewith chemical cleaning cloths, paint thinner, ethyl alcohol or otherchemical agents to clean the unit as they could damage the surface.User registrationSee the end of this manual for details about user registration.