82 TASCAM DR-60D9 – Connecting with a computerBy connecting this unit with a computer using the USB cable, youcan transfer audio files on the SD card in the unit to a computer, aswell as transfer audio files on the computer to the SD card in theunit.WAV: 44.1/48/96kHz, 16/24-bitBWF: 44.1/48/96kHz, 16/24-bitComputerUSBMini-B USB plugNOTE• Instead of using USB to connect the DR-60D and a computer, youcan also conduct the same operations by removing the SD cardfrom the DR-60D and connecting it directly to a computer thathas a built-in SD card slot or by using a card reader.• The file extension used for both WAV and BWF file formats is“.wav”.CAUTION• When connected by USB and set to STORAGE, the other functionsof the recorder are disabled.• The unit should be connected directly with the computer insteadof via a USB hub.When the unit is connected through USB after being turned on, orwhen the unit is turned on after being connecting through USB, theUSB SELECTscreen appears to choose between bus power supplyor data transmission through USB.Turn the DATA dial to select STORAGE, and press the DATA dialto connect the unit with the computer for data transmission. Themessage of USB connected appears in the display.Make sure that the SD card is inserted properly.NOTEIf the USB cable is connected to the unit when batteries has beeninstalled, the power is supplied from the USB port (USB bus powerprioritized).If an SD card is not properly inserted before making the USBconnection, Can't Save Dataappears on the screen.This unit appears on the computer screen as external volume named“DR-60D”.
