TASCAM DR-60D 8911 – Using the REMOTE jackThis unit has a REMOTE jack to which you can connect a TASCAMRC-3F footswitch-type remote control or TASCAM RC-10 wiredremote control (both sold separately) that can be used to operatethe unit.Footswitch (TASCAM RC-3F)FootswitchTASCAM RC-3F(sold separately)Setting footswitch operationUse the REMOTE setting screen to make footswitch settings.1. Press the MENU button to open the MENU screen.2. Turn the DATA dial to select OTHERS, and press the DATA dial or/ button to open the OTHERS screen.3. Turn the DATA dial to select REMOTE, and press the DATA dial or/ button to open the REMOTE screen.4. Turn the DATA dial to select CONTROLLER, and press the DATAdial or / button.5. Turn the DATA dial to select RC-3F. (default value: RC-3F)6. Use the . button or DATA dial to select MODE, and press theDATA dial or / button.7. Turn the DATA dial to select MODE.Options: PLAY (default value), RECORD1, RECORD2, RECORD3,REVIEWMODE FOOT SWL C RPLAY REW PLAY/STOP FWDRECORD1 STOP REC/PAUSE INCRECORD2 STOP REC/PAUSE MARKRECORD3 STOP REC/PAUSE SLATEREVIEW FLASH PLAY/STOP(Play while pressed) FWDINC: Track incrementing functionMARK: Mark functionFLASH: Jump-back playback(All other functions are the same as using the buttons on theunit.)8. When finished making the setting, press the Stop (8) [HOME]button to return to the Home Screen.
