TASCAM DR-60D 9Quick Start GuideIn this chapter we will try recording and playback with the TASCAMDR-60D. We will also try using it connected to a digital single-lensreflex (DSLR) camera.The default recording format is set to 16-bit/44.1kHz WAV whenshipped from the factory.Higher-quality files can be produced by changing the recordingformat. See “Selecting file format, sampling frequency, andmaximum file size” on page 42 for details.1. Install batteries in the battery compartment on the backof the unit. Fit them to the ¥ and ^ marks shown in thecompartment.2. Insert an SD card into the SD card slot on the right side of theunit.3. Press and hold the ¤ button on the right side of the unit untilthe “TASCAM DR-60D” startup screen appears.Start -Up Screen
