TASCAM DR-60D 818 – Mixer4. Start recording to record a decoded MS signal.NOTEYou can also set the MS MODEto REC on the MIXER screen.Decoding the playback sound1. Select a file that was recorded by MS mics with MS MODEset toOFF.2. When the Home Screen is open, press the MIXER button toopen the MIXER screen.3. Set MS MODEto MON.4. Start playback to decode during playback.MS decoder settingsWhen the MS MODEon the MIXER screen is set to REC or MON, thePAN item changes to WIDE, which allows you to adjust the stereowidth of the sound.To decode while recording, open the MIXER screen during recordingstandby.To decode the signal during input, set MS MODEto REC. To decodethe signal during playback, set MS MODEto MON.Item Setting range Operation detailsWIDE 0–100 Adjusts the width of the soundAt 0, mid is 100%. As the number increases, the amount of sidesignal increases.
