48 TASCAM DR-60D4 – RecordingUsing the limiterWhen the limiter is on, the mic input gain will be adjusted automati-cally according to the input level to set the recording level so thatdistortion does not occur even when loud sounds are input.1. Press the MENU button to open the MENU screen.2. Turn the DATA dial to select INPUT SETTING, and press theDATA dial or / button to open the INPUT SETTINGscreen.3. Turn the DATA dial to select LIMITER for a channel, and pressthe DATA dial or / button.Ch1 INPUT SETTING screen4. Turn the DATA dial to set the limiter for mic input.Options ExplanationOFF(default value) Limiter offMONO Limiter on only for selected channelLINK Limiter on for both selected and linkedchannels5. When finished making the setting, press the stop (8) [HOME]button to return to the Home Screen.CAUTION• Distortion might occur if the input sound is too loud even whenthe limiter is on. In such a case, lower the input level or increasethe distance between the unit and the sound source.• During mic input, this lights if distortion occurs in the analogcircuitry. During line level input, this does not light even ifdistortion occurs in the analog circuitry.NOTE• The icon appears on the recording screen when the limiteris on for any channel (when set to MONO or LINK).• The limiter function can be set and changed even duringrecording standby and when recording.• When you change the 1Ch (2Ch) limiter setting from MONO toLINK the setting of the other channel will be changed to match,so a confirmation pop-up message appears.Pop-up message when changing from MONO to LINK• The Ch3/4 MONO and LINK limiter settings affect both channels.When set to MONO, the limiter only affects the channel thathas excessive input. When set to LINK, the limiter affects bothchannels in the pair when either has excessive input.
