TASCAM DR-60D 614 – RecordingSelf-timer functionLike a camera, the unit has a self-timer to trigger the start ofrecording after a set period of time.1. Press the MENU button to open the MENU screen.2. Turn the DATA dial to select REC SETTING, and press the DATAdial or / button to open the REC SETTINGscreen.3. Turn the DATA dial to select SELF TIMER, and press the DATAdial or / button.4. Turn the DATA dial to set the amount of time until recordingstarts.Options: OFF (default value), 2sec, 10sec5. When finished making the setting, press the stop (8) [HOME]button to return to the Home Screen.6. Press the record (0) button to enter recording standby.The self-timer icon appears in the recorder status screen, andtime is shown on the right.7. Press the record (0) or play (7) button.Recording will start after the set time period.NOTE• This function cannot be used when recording is paused in themiddle of recording.• Self-timer function is not possible when using the AUTO RECfunction.Using the auto tone functionThe auto tone function can be used to automatically add a tone atthe beginning and ending of recording.By connecting the CAMERA OUTjack on the left side of the unit tothe audio input of a camera, you can record the same tone in bothfiles. These tones can be used to align audio and video recordings inmedia editing software.1. Press the MENU button to open the MENU screen.2. Turn the DATA dial to select REC SETTING, and press the DATAdial or / button to open the REC SETTINGscreen.3. Turn the DATA dial to select AUTO TONE, and press the DATAdial or / button.4. Turn the DATA dial to set when the tone signal is inserted.Options: OFF (default value), HEAD (start of recording only),HEAD+TAIL (both start and of recording)5. When finished making the setting, press the stop (8) [HOME]button to return to the Home Screen.
