TASCAM DR-60D 353 – PreparationTurning the power on and off (putting it instandby)CAUTION• The unit goes in standby mode if shut down when the unit isoperating on AC power supplied through the TASCAM PS-P515UAC adaptor (sold separately), or bus power supplied from a USBport of a PC.• Turn down the volume of the sound system connected to the unitbefore starting up or shutting down (standby) the unit.• Do not use headphones when starting up or shutting down(standby) the unit. Otherwise, a large noise would cause damageto headphones or your ears.Starting up the unitTo start up the unit from the stopped state, press and hold the ¤button until TASCAM DR-60D(start-up screen) is displayed on thedisplay. The Home Screen appears when the unit starts up.Start -Up Screen Home ScreenCAUTIONWhen the unit is started up for the first time (or when the built-inclock is reset after being left unused without batteries), theDATE/TIME screen appears before the start-up screen to adjustthe date and time. (See “Setting the date and time” on page 36.)Shutting down (putting the unit in standby)Press and hold the ¤ button until LINEAR PCM RECORDERappears on the display.The power turns off after the unit completes its shutdown (standby)process.CAUTIONAlways use the ¤ button to shutdown (standby) the unit.Do not remove the batteries or disconnect the power cable (ACadaptor TASCAM PS-P515U or USB cable) accidently while theunit is operating. If you do so, the unit cannot shut down properlyand all recordings, settings and other data will be lost. Lost datacannot be restored.
