TASCAM DR-60D 534 – Recording12. If REC MODEis set to DUAL ST, you can also set MS micdecoding.To use a mid-side mic, turn the DATA dial to select MS MODE,and press the DATA dial or / button.13. Turn the DATA dial to set the decoding mode when using amid-side mic.Options ExplanationOFF Record in ordinary stereo mode.REC Use to decode while recording. Playback isconducted without decoding.MONITORRecord mid-side mic output without decodingfor decoding later. Use this mode to monitorwhen recording with a mid-side mic.Use this also when playing back mid-side filesthat were recorded without decoding.14. When finished making the setting, press the MENU button toreturn to the MENU screen. Press the DATA dial or . buttonto select the other item.15. Turn the DATA dial to select INPUT SETTING, and press theDATA dial or / button to open the INPUT SETTINGscreen.16. Turn the DATA dial to select DELAY, and press the DATA dial or/ button.17. Turn the DATA dial to set this value according to the distance ofthe mic connected to the channel.Range: 0ms (default value) to ±150ms (in 1ms increments)18. When finished making the setting, press the stop (8) [HOME]button to return to the Home Screen.Starting dual recordingPress the record (0) button to start dual recording.During dual recording, the recording screen appears as follows.Dual mono recording Dual stereo recordingIn the input source display area of the recording screen, the inputlevels of the current input source and the dual recording are shown.
