TASCAM DR-60D 554 – Recording9. Turn the DATA dial to set the decoding mode when using amid-side mic.Options ExplanationOFF Record in ordinary stereo mode.REC Use to decode while recording. Playback isconducted without decoding.MONITORRecord mid-side mic output without decodingfor decoding later. Use this mode to monitorwhen recording with a mid-side mic.Use this also when playing back mid-side filesthat were recorded without decoding.10. When finished making the setting, press the MENU button toreturn to the MENU screen.11. Turn the DATA dial to select INPUT SETTING, and press theDATA dial or / button to open the INPUT SETTING screen.12. Turn the DATA dial to select DELAY, and press the DATA dial or/ button.13. Turn the data dial to set the value according to the distancebetween mics.Range: 0ms (default value) to ±150ms (in 1ms increments)NOTE• If the mics (channels 1/2 and channels 3/4) are far apart fromeach other, a time delay could occur when recording. Use theDELAY setting to eliminate this time delay when recording.• The DELAY setting can be changed even during recordingstandby and when recording.14. When finished making the setting, press the stop (8) [HOME]button to return to the Home Screen.Starting 4-channel recording1. Press the record (0) button to begin recording standby.NOTEBefore you start recording you can confirm the recording audiofile format and sampling frequency at the top of the recordingscreen, as well as the input sources on the left and the recordingproject name beneath the meter bars.2. Press the record (0) button again to start recording.
