86 TASCAM DR-60D10 – Settings and InformationSystem Settings and Formatting (SYSTEM)From the SYSTEM Screen, you can change various settings tooptimize the device for your use environment and other require-ments. You can also initialize the unit and format the SD card.1. Press the MENU button to open the MENU screen.2. Turn the DATA dial to select OTHERS, and press the DATA dial or/ button to open the OTHERS screen.3. Turn the DATA dial to select SYSTEM, and press the DATA dial or/ button to open the SYSTEM screen.The following settings can be made for the items on theSYSTEM screen.Use the . or / button and the + or − button to set eachitem.Setting the automatic power saving functionUse the AUTO PWR SAVEitem to set the amount of time withoutactivity or operation until the unit turns off (enters standby)automatically.Options: OFF (automatic power saving is disabled, defaultvalue), 3min, 5min, 10min, 30minSetting the backlightUse BACKLIGHT to set the time until the backlight automaticallyturns OFF after the last operation when powered by the internalbattery.Options: OFF (turned off ), 5 sec (factory setting), 10 sec, 15sec, 30 sec, ALWAYS(always on)Adjusting the display contrastUse CONTRAST to adjust the display contrast.Options: 1–20 (factory setting: 5)Setting the type of AA batteriesUse BATTERY TYPE to set the type of the AA batteries that you areusing. This setting is used to show the amount of remaining batterycharge and determine if the unit has enough power for normaloperation.Values: ALKAL (alkaline batteries, default), Ni-MH (nickel-metal hydride batteries)Setting the phantom power voltageUse the PHANTOM VOLTitem to set the voltage of the phantompower supplied when external mics that require it are connected.Options: +24V, +48V (factory setting)NOTEBattery power will be consumed faster when set to +48V thanwhen set to +24V.
