34 TASCAM DR-60D3 – PreparationUsing USB bus powerConnect the unit to a PC using the attached USB cable as shown inthe illustration.ComputerUSBMini-B USB plugThe USB SELECT screen appears to choose between USB buspower for power supply or connection with a PC through the USBcable when USB cable is connected after the unit is turned on orwhen the unit is turned on after connecting the USB cable. Turn theDATA dial to select BUS POWERand press the DATA dial to selectpower supply from the USB port. The Home Screen will appear.NOTE• Power is supplied from the USB port if the USB cable is connectedto the unit that contains batteries (USB bus power prioritized).• The AC adaptor also connects using the USB cable, so set it to BUSPOWER in the same way.CAUTION• Depending on the USB bus power specifications of the computer,this unit might not function when connected to the computer byUSB cable. In this case, use a TASCAM PS-P515U AC adaptor (soldseparately) or batteries.• This unit does not support computer power conservation andsleep functions. When powering the unit using the USB bus powerof a computer, always turn such functions off.
